December 14, 2000, 8:57 AM — If you haven't yet upgraded your LAN infrastructure to switched 100 Mbps equipment,
there is probably no better time to do so than now. Just to be clear here, I'm talking
about getting every desktop on a full duplex 100 Mbps switched link. The actual
backbone -- for connecting wiring closets to your data center, or interconnecting
buildings on a campus -- would be Gigabit Ethernet, 1000Base-Sx, which runs over two
multimode optical fibers.
There's no other LAN technology or topology that makes sense today. It costs you
more to maintain that aging token ring or FDDI infrastructure than it will to upgrade.
And residual 10 Mbps hubs are a bottleneck and may be a source of problems, like
looping, so do yourself a favor and get rid of them.
The industry would have you believe that 10/100 switches have become commodity
products. That's not completely true. While you can generally buy these switches today
for less than $100 per 10/100-switched port, there are some other key factors to
consider. Here are three to keep in mind.
- Don't just follow the leaders.
href="http://www.cisco.com/warp/public/cc/cisco/mkt/switch/">Cisco's Catalyst 5000
series and 3Com's
SuperStack II series are the leading sellers, and both are fine switches, but I've
found that they have some subtle limitations. href="http://www.extremenetworks.com/solutions/enterprise/entprod.asp">Extreme
Networks, Foundry Networks,
and Hewlett-Packard also offer super
switches, and ought to be on your short list.
never drops packets. That's because of the way LAN switches work: whenever too many
inbound users concurrently contend for the same outbound port -- the link to your data
center, say, or the link connecting your main email server -- there can be an overload
and lost data. This brings us to the last point.
Most worthwhile 10/100 switches today have built-in SNMP agents that include some
support for the RMON
MIB (a remote monitoring management information base). But the remote monitoring
should be easy to enable, and the vendor should offer you an affordable Windows
application that can monitor this RMON data when you buy the switch. That leaves out
Cisco and 3Com; figuring out RMON on a Catalyst switch is too often an exercise in
futility, thanks to Cisco IOS's command-line interface, and 3Com doesn't offer an
affordable mechanism for monitoring the switch's RMON data.