If you need to encrypt traffic from your computer or mobile device, you have many options. You could buy a commercial VPN solution, or you could sign up for a VPN service and pay a monthly fee. Or for less money, you could create your own VPN and gain the use of a Linux VPS (Virtual Private Server) anywhere in the world. This roll-your-own option is made possible through the use of the open source OpenVPN project, Linux, and a few open source client-side applications.
The VPS-based setup described here is designed to encrypt all the traffic from your laptop, desktop, or mobile phone to your VPN server, which then unencrypts that traffic and passes it on to its destination. This can be very useful if you're using the Internet from a coffee shop, a hotel, or a conference and you do not trust the network.
[ Also on InfoWorld: Teach your router new tricks with DD-WRT. | Get expert networking how-to advice from InfoWorld's Networking Deep Dive PDF special report. | Learn how to secure your systems with Roger Grimes' Security Adviser blog and Security Central newsletter. ]
Putting this VPN together is generally the work of only a few minutes, and it requires minimal Linux command-line skills. The only tools you'll need are an SSH client and a VPS.
You can purchase a VPS on a monthly, quarterly, or yearly basis from any number of service providers. Some larger services offer VPS services in several different countries and allow you to choose where your server will run. In most cases, it's best to find a VPS that's located close to where you intend to generate the most traffic; the further away you are, the higher the tunnel latency will be, and the connection may be slower than you'd like. However, if you want your Internet traffic to appear to originate from Switzerland while you connect from New York or Los Angeles, you can do that as well.
To continue reading, register here to become an Insider. It's FREE to join.
This story, "How to roll your own VPN" was originally published by InfoWorld.