Motherboard port guide: solving your connector mystery

Numerous connectors and pins live on your motherboard. We take you on a tour of the most commonly used slots, connectors, and pinouts.

By Loyd Case, PC World |  Hardware, Asus, Intel

USB 3.0 front panel: This connector is used to drive front-panel USB 3.0 connectors. It requires more pins than USB 2.0 connectors do, but it drives two USB 3.0 ports instead of one. If your PC case lacks a USB 3.0 internal cable, you won't be able to use it. Like back-panel connectors, front-panel USB 3.0 ports are often color-coded blue.

AMD CPU socket: I'm calling out this component because its style differs from that of a modern Intel CPU socket. AMD CPUs still have pins, whereas Intel has moved the pins to the motherboard socket.

Intel DZ77GA-70K

I'm using a photo of just one section of this board, to call out some specific connectors and to get a little closer in. The Intel DZ77GA-70K motherboard is designed to accommodate the latest Intel Z77 chipset.

Case fan header: As noted earlier, most higher-end motherboards have several of these fan headers scattered around the board. If enough of them are available, you should connect your fans to them, so that the BIOS can monitor and manage the fan speeds--unless you're a serious overclocker who uses separate fan-control modules.

PCI Express x4 slot: This relatively rare physical and electrical PCIe x4 slot is used for higher-performance networking cards and for some storage controller cards.

S/PDIF digital audio: This older type of connector was originally used to connect to CD-ROM drives. Today it's still used to connect to some optical drives and other audio devices that support S/PDIF (Sony/Philips Digital Interface) digital audio.

USB 3.0 front panel: The DZ77GA motherboard ships with two front-panel USB 3.0 connectors, driving up to four USB 3.0 ports on the front of the PC case.

High-current USB 2.0 front panel: This is a slightly different type of USB 2.0 connector. Though it acts as a normal USB 2.0 port when sending or receiving data, it can deliver extra current to permit fast charging of mobile devices, and it can even charge devices (like Apple's iPad) that requires more current than standard USB 2.0 normally delivers.

Consumer IR: This connector is used to attach front-panel infrared receivers, which enable users to control the PC via a standard programmable remote.

Diagnostic LEDs: Most motherboards have simple LEDs that light up or change color if the board experiences problems. A few higher-end boards, however, have these status LEDs, which flash an alphanumeric code that helps the user narrow down the source of a boot problem.

That wraps up our tour of various motherboard connectors, pins, and ports. Though I haven't covered all of the possibilities by any means, the ones listed here account for the vast majority of connectors you'll encounter on today's motherboards.


Originally published on PC World |  Click here to read the original story.
Join us:
Facebook

Twitter

Pinterest

Tumblr

LinkedIn

Google+

Answers - Powered by ITworld

ITworld Answers helps you solve problems and share expertise. Ask a question or take a crack at answering the new questions below.

Join us:
Facebook

Twitter

Pinterest

Tumblr

LinkedIn

Google+

Ask a Question
randomness