ITU standardizes 1Gbps over copper, but services won't come until 2015

G.fast standard will open the door for 4K video over telephone wires

By , IDG News Service |  Networking

The ITU has taken a big step in the standardization of G.fast, a broadband technology capable of achieving download speeds of up to 1Gbps over copper telephone wire.

The death of copper and the ascent of fiber has long been discussed. However, the cost of rolling out fiber is still too high for many operators that instead want to upgrade their existing copper networks. So there is still a need for technologies that can complement fiber, including VDSL2 and G.fast.

Higher speeds are needed for applications such as 4K streaming, IPTV, cloud-based storage, and communication via HD video, ITU said.

The standardization of G.fast started in 2011, and has now reached what is known as first-stage approval or consent. That means the technical specification is ready to become standard. Next up is a comment period, and the standard is expected to be final by April next year, according to ITU.

"This is the most critical milestone in the process. The comments are designed to optimize the standard, not to reverse anything," said Michael Weissman, vice president of marketing at chip vendor Sckipio, which is focusing solely on silicon for G.fast.

The technology increases the bandwidth by using more spectrum, which could be compared to adding more lanes to a road. G.fast will use the 106MHz of spectrum, which compares to the 17MHz or 30MHz used by VDSL2 and the 40MHz used by the fastest LTE-Advanced networks currently being tested.

The drawback with G.fast is that it will only work over short distances, so 1Gbps will only be possible at distances of up to about 100 meters. The technology is being designed to work at distances up to 250 meters, though transmission speed is slower at that distace.

Similar to VDSL2, used to offer broadband at up to 100Mbps over copper, G.fast performance is affected by crosstalk interference. To counteract that, both use a technology called vectoring. It works by continuously analyzing the noise conditions on copper lines, and then creates a new, antinoise signal to cancel it out, much like noise-cancelling headphones. Without the use of vectoring, speeds offered by G.fast would drop from over 1Gbps to 200Mbps, according to Huawei Technologies.

Companies involved in its development have already tested the technology's capabilities through lab and field trials using prototype equipment based on drafts of the standard, according to ITU.

Join us:
Facebook

Twitter

Pinterest

Tumblr

LinkedIn

Google+

Spotlight on ...
Online Training

    Upgrade your skills and earn higher pay

    Readers to share their best tips for maximizing training dollars and getting the most out self-directed learning. Here’s what they said.

     

    Learn more

Answers - Powered by ITworld

ITworld Answers helps you solve problems and share expertise. Ask a question or take a crack at answering the new questions below.

Join us:
Facebook

Twitter

Pinterest

Tumblr

LinkedIn

Google+

Ask a Question
randomness