With tech breakthrough, Seagate promises 60TB drives this decade

Laptop hard drives could have up to 20TB of capacity

By , Computerworld |  Storage, Seagate

Seagate announced it is the first hard drive maker to achieve a density of 1 terabit (1 trillion bits) per square inch on a disk drive platter.

The technology used to achieve the benchmark, which Seagate said it would introduce in products later this decade, will also lead to the production of 3.5-i. hard drives with up to 60TB of capacity.

Seagate reached the areal density milestone by using heat-assisted magnetic recording (HAMR), which the company patented in 2006.

At the most basic level, HAMR uses nanotube-based lubrication to allow the read/write head of a disk drive to get closer to the surface of a spinning platter in order to store more data.

Using HAMR technology, Seagate achieved a linear bit density of about 2 million bits per inch, resulting in a data density of just over 1 trillion bits, or 1 terabit, per square inch -- 55% higher than today's areal density ceiling of 620 gigabits per square inch.

"Hard disk drive innovations like HAMR will be a key enabler of the development of even more data-intense applications in the future, extending the ways businesses and consumers worldwide use, manage and store digital content," Mark Re, senior vice president of Heads and Media Research and Development at Seagate, said in a statement.

With an areal density of 620 gigabits per square inch, today's 3.5-in. hard drives have a maximum capacity of 3TB. Laptop drives, or 2.5-in. drives, top out at 750GB or roughly 500 gigabits per square inch.

The first generation of HAMR drives, at just over 1 terabit per square inch, will likely more than double the latter capacities - to 6TB for 3.5-inch drives and 2TB for 2.5-inch models.

HAMR has a theoretical areal density limit ranging from 5 to 10 terabits per square inch, enough to enable 30TB to 60TB 3.5-inch drives and 10TB to 20TB for 2.5-inch drives.

Prior to HAMR, the most significant breakthrough in drive density was perpendicular magnetic recording (PMR), which Seagate and Hitachi use in their drives today. That technology was introduced in 2006 and is also used in magnetic tape cartridge production. PMR basically stood bits upright on a platter's surface so they could be packed closer together.

PMR technology is also expected to allow companies to reach the one terabyte per square inch milestone in the next few years, but that will also mark the technology's upper limits, Seagate said.


Originally published on Computerworld |  Click here to read the original story.
Join us:
Facebook

Twitter

Pinterest

Tumblr

LinkedIn

Google+

Answers - Powered by ITworld

ITworld Answers helps you solve problems and share expertise. Ask a question or take a crack at answering the new questions below.

Join us:
Facebook

Twitter

Pinterest

Tumblr

LinkedIn

Google+

Ask a Question
randomness